Shop Wireless

Description:
The RF-Keyfob-319 is a wireless handheld device that is used to turn the alarm system on and off.
Allows arming, disarming and panic activation. The sensor is powered by (1) replaceable 3-VDC, lithium coin-cell battery

The 2GIG-CP-DESK Go!Control Desktop Kit allows your 2GIG GC2 control panel to sit at two different viewing angles. Bumper pads on the equipment protect furniture and prevent sliding. Works with any 2GIG GC2 Go!Control panel.
Product Features:
Allows panel to sit at two different viewing angles.
Sleek form factor
. Bumper pads to protect furniture & prevent sliding.
Works with any Go!Control panel

The Alula RE653 is a Connect+ encrypted, weatherproof, wireless outdoor PIR motion detector. The RE653 protects outdoor areas with two IR sensors, for advanced animal immunity, and transmits an alarm when motion is sensed from up to 15 feet (5 meters) away. The RE653 is battery-powered and enclosed in a IP55 weatherpoof casing to operate in harsh environmental conditions.

The Alula DWS-LL is an encrypted, LongLife, wireless door or window sensor designed to be used with the Alula Connect+ Panel. The DWS-LL sensor detects opening and closings of doors and windows. It can secure just about anything that opens with its simple peel-and-stick mounting solution. The DWS-LL will alarm, when the Connect+ Panel is armed and the magnet is pulled away from the contact.

Wearable medical button with fall detection technology

Description:
The Recessed Door/Window Sensor is a supervised, wireless sensor that detects the opening and closing of doors or windows. The sensor and magnet are recessed mounted into the frame.
When activated, the sensor transmits an open (trip) or close (restore) signal to the panel. These are the signals the unit provides: supervisory and low battery (as needed). The sensor is powered by (1) replaceable 3-VDC, lithium battery.

Description:
The Recessed Door/Window Sensor is a supervised, wireless sensor that detects the opening and closing of doors or windows. The sensor and magnet are recessed mounted into the frame.
When activated, the sensor transmits an open (trip) or close (restore) signal to the panel. These are the signals the unit provides: supervisory and low battery (as needed). The sensor is powered by (1) replaceable 3-VDC, lithium battery.

Built-in reed switch
Normally closed external contact input
1 lithium battery included
Reliable 433 MHz and 868 MHz technology
Available in brown housing
Case and wall tamper
WS4945N normally open version available.

Visual alarm verification in day and night
Full color, high-resolution images transmitted from the premises via Cellular or Ethernet
CMOS camera with IR illumination
Instant capture – ensures image recordings start immediately
Camera range: 39 ft. (as detector); with IR illumination 32 ft.
No vertical adjustment needed
Auto-setup for brightness and contrast via the control panel
Longer battery life – 3-5 years in typical use (depending on battery type)
Battery compartment for easy battery replacement
Installer-friendly – adjustment-free installation
Front cover and back tamper
Optional pet-tolerant model for animals up to 85 lbs.
Low battery indication
Compatible with PowerSeries Neo, PowerSeries Pro and Qolsys panels

The Alula RE218 Honeywell Compatible Wireless Flood & Temp Sensor is an integrated environmental sensor. This sensor is designed to detect flood conditions and extreme temperatures and can be configured to report custom high and low-temperature trip points. Heat alarms when over 100 degrees F and Freeze alarms when under 45 degrees F.